123 CYA FIX glue has become one of the best in the 123 glue industry with its transparency, high adhesion and drying speed, and its quality has distinguished itself among competitors.

The use of glue 123 requires the fulfillment of prerequisites to increase the quality of the work, some of which we have stated below, which will help the desired result.

1- In order to perform the best performance of the adhesive, carefully dry, clean, and free of dust, rust, and grease the intended connection surfaces.

2- Spray the otitis activator on one of the surfaces and let it evaporate.

3- Apply a few drops of glue to the opposite surface.

4- Quickly place the surfaces in their proper place and squeeze for a few seconds (15 seconds).
Safety items when working with glue 123
• Avoid inhaling the vapor from the spray.

• Use in a place with proper ventilation.

• Avoid smoking while working with glue 123.

• Avoid contact with skin and eyes, and in case of contact with eyes, wash with plenty of water and consult a doctor.

• Avoid placing it in direct sunlight and temperatures above 50 degrees.

• Do not throw the 123 adhesive container into the fire or puncture it even after it is finished.

• When there is a fire, foam - Co2 gas - powder should be used to extinguish the fire.
Glue solvent 123
The first substance used to remove glue 123 is acetone. By using this material, the glue can be destroyed slowly and it is mostly used in cases where the glue is completely dry. (Elite, it is necessary to remind that the acetone used to remove the varnish does not have the ability to remove the glue 123 due to its dilution.) Therefore, you must use industrial acetones. To clean anything on which the glue 123 has been poured and dried, we must first put it in acetone and wait until the glue is completely soft before it is ready to clean.